Dyson - Purifier Cool TP11

for me Dyson has much better sensors, probably the best in the market.

I farted and Dyson picked up immediately, while other brands didnt seem to even notice.

About to send the PC1 back (it’s my third in 2 weeks) because of whining noise and have got the Philips instead (was going to get the 7000 but Philips have a sale on the 8000 making it cheaper than the 7000!). It’s quieter for sure - I measured 1m away using an app with max fan on both and Philips averaged 64db either Dyson on 68db. Dyson also had peaks of 76db which may be the whining noise!). The sound on the Philips is much more what you expect - no whining just the sound of the air which is not annoying like the whine. Air flow is also way better on the Philips - sitting on the settee 2.5m away we can feel it strongly on max, where as the Dyson was a pleasant breeze. I prefer the Dyson style but the Philips is still attractive and modern and fits well in our lounge. Sizewise they are very close in height but Philips has a bigger base and also noticeably heavier. Apps both good, but more data in the Philips one. Philips has more features, a circulation and heat mode as well as the fan, and a new AI auto mode but I’m not exactly sure what that does yet! Any other questions let my know, or anything you’d like me to test. Dyson is going back tomorrow.

For Dyson PC1 I get Air Quality, PM2,5 PM10 indoor and Air Quality, PM2.5, PM10, N02, Grass Pollen, Tree Pollen, Temp and humidity outdoors. For Philips 8000 Air Quality, PM2.5, Gas, Allergens, Humidity, Temp Indoor and Wind, Humidity, UV Index, PM10, PM2.5, Grass Pollen, Mugwort Pollen, Alder Pollen, Ragweed Pollen, Birch Pollen, Olive Tree Pollen. Strangely the PC1 wouldn’t take my local town, I had to choose a bigger one nearby for outdoor data, even though my other Dyson machine does. In Dyson you have to search for a town/city. On Philips if you allow location detection it finds it for you and it was my local town. The AI mode which I have now looked at uses some AI model to analyse the data captured including I assume how you use the machine to control Indoor Air quality, learn usage patterns to determine quiet times, energy optimisation, and performance personalisation (by looking at outdoor air quality cleaning performance). Sounds impressive - but time will tell if it is a noticeable improvement (or worse than without it!) Disagree re the look, but that’s highly subjective 😀

Build quality is solid. The Dyson is much lighter and feels more plasticky (still nice though). So far very impressed with it, with the stand out quality being the power of the fan and the fact it’s relatively quiet with no whine. Edit: also filters appear to work a treat - we have had high grass pollen here last few days but indoors the sensors report nothing even though we have had windows and doors open at times. I’m not sneezing anyhow!

I recently bought dyson Tp11 as its a new product there are not many reviews available to decide. I bought one last week and here's my review. This fan is disappointing, the airspeed is too low at max limit. The sound is too loud at Max level. However the purification is pretty good. Pros: 1. Sleek design 2. So modern Conns: 1. Low airspeed 2. Too loud I am pretty disappointed. Any suggestions how to make the room cooler.

I agree with the “too low”. The output at 10 is horrible for a fan unless you are at least 6 feet or closer to it. I just got mine and it will be going right back.

I’m pretty sure they are talking about the output not strong enough to be cooling. Unless you sit nonsensically close to it, it’s one of the worst “fans” I’ve ever purchased. The output is a joke.

Jag har Dyson Purifier Cool PC... 1 eller 2, kommer ej ihåg, men den funkar ypperligt för mina andningsbekymmer under natten. Vet ej om dina specifika behov dock och har inte heller katter så kan inte garantera något, men den brukar vinna bäst i test också så! Var därför jag köpte den.

A couple years ago I bought a Dyson that reads out the PM2.5 level. Even when the AQI is >100 my indoor air quality is good (below 25). Thus the purifier doesn’t get much use. Maybe I got lucky and my condo is relatively air-tight? Dunno, but YMMV.

bought a used dyson tp, before that just a box fan and merv filter. watching the filter media go from bright white to covered in dust and dark gray for a small room clearly showed a need for air filtration. It should be a part of everyones home

You'll want to block places the smoke is entering from if possible (a rolled up towel in front of door, covers on electrical outlets). Dyson air purifier fans will help. I've smoked inside my place and run the dyson and it got rid of all the smell but it ran full blast and that's a bit loud. You can also try other natural air deodorizers like putting out a bowl of baking soda. Ground coffee, orange peel and apple slices are also supposed to help. I used them when I used to smoke to freshen my place along with vinegar (tho the vinegar has a strong smell) and thought it was helpful.

I got one of the Dyson ones that oscillates. It's amazing.

Just never buy from blue air directly. They won’t help up if a package is lost. I’ve used a few other smart purifiers. The Dyson ones suck at dust and the smart part works with Alexa and google home only and it’s very buggy. It needs to be reconnected often. Just got a lg 360 and it’s good other than the wifi module in the unit. It loses connection frequently and also is limited to their app. It briefly worked in Alexa and google home but often non responsive. It does have built in air quality sensor though. We also had a blue air sense model several years ago. That was one of their first smart models. It had to get WiFi reset about once a year and didn’t support a lot of integrations. Eventually the WiFi module failed on it. We have business grade wifi (Cisco Meraki mr56 x 2 APs). so it’s not like budget consumer WiFi routers.