Vantrue - Sonnet 1 Pro (S1 Pro)

I use the Vantrue Sonnet 1 pro. It's affordable and has lots of features. The picture is pretty decent as well. I use that in my RAM 1500.

Personally, I recommend the Vantrue S1 Pro. [Here's some footage I uploaded with the device.](https://youtu.be/P7v_1vJ7OK0) Edit: I'm sorry OP, I'm not sure why the video isn't uploading in higher quality.

https://preview.redd.it/5i0gyrco4jke1.jpeg?width=4032&format=pjpg&auto=webp&s=d7cb51774cf12227e526030a05a3bb78e9830797 Here’s the dashcam next to my rearview mirror. Ran it through the headliner -> through the weather stripping -> behind the glovebox -> into the power outlet inside the center console. The rear camera is the same, but after routing it through the weather stripping I routed it underneath the plastic on the floor.

I recommend passing on this and trying out a Vantrue camera first. I got the Vantrue S1 Pro for about $150. Came with both front and rear cameras and has been awesome so far. You can get a clean install by routing it through your headliner, front door pillar, weatherstripping and then into a power adapter in the center console storage cigarette lighter.

I bought the Vantrue S1 pro. It has parking mode capability, but I have not hooked it up yet.

I just got a Vantrue N5. Love it. Great quality. But if that's too expensive. The Vantrue S1 pro is also pretty good

I’m using the Vantrue S1 Pro

25 Forester cameras are tight up against the windshield. I suspect they will have less potential issues than earlier versions. I'll be installing a Vantrue s1 pro in my wifes this weekend, and plan to place it on the right hand side of the rear view mirror, and otherwise follow the same install I did on my Impreza. In my Impreza, I dropped the headliner (which is a lot of work... all door weatherstripping, seat belts, pillar plastics, some other door trims... theres a lot), ran the wiring for the rear camera through the tube in the hatch and above headliner on the "top-side" of the curtain airbags with other wiring. Brought it behind the eyesight module and with the mirror wiring. From base of the front camera back up into the headliner, up around to the left side a pillar down to fuse panel. It was a solid 6 hours of work, but I've had no issues with it interfering with my older eyesight system.

I'm happy with my Vantrue Pro