VIOFO - A229 Ultra 3CH

I love this brand. I have yet to see anyone else with such good quality. I have the 129, 229 and the recent 329 version in my truck. No issues at all. Money well spent.

Yes, but I’d recommend a dashcam with higher resolution than 1080p. Preferably 2.5K* or 4K. I like Viofo.

Whatever you pick, I’d recommend against a camera that dangles off a mount unless it’s very small. I tried a Thinkware Q200 but I had to take it off immediately bc the Tacoma windshield is so small, it distracted my view no matter where I tried mounting it. I got a Viofo A229 instead and like another commenter, I mounted it in the black dot area of the windshield next to the mirror and I hardly notice it.

Been looking into this as well. I like my Viofo A229 in my Mustang, and will eventually buy one for the new CX-50 but with the preferred trim the hard wiring seems to be the hardest part with no sunroof or frameless mirror. Would love to know if others have done it and whether they went into the engine bay through the firewall or tapped in somewhere else

We had a FitCamX hardwired in our 24 Ioniq 5 and it would not loop record. I had 2 very close calls the FitCamX completely missed. FitCamX could not resolve why my camera would not work, and after 1 month of trying, I yanked it out and replaced it with a Viofo A229 that has been flawless. I have ours setup for recording when parked, a function the FitCamX failed at as well. A lot of people report good experience with FitCamX but that wasn't my use case. When we were troubleshooting the FitCamX, it had a Beta testing vibe to the process. FitCamX will relentlessly work with you to their credit and when I returned the camera to them, they fully refunded me without any prodding.

I had a hardwired FitCamX, and it would not loop record. I ended up replacing it with a hardwired VIOFO A229, which has been flawless. I had two near-miss incidents, the FitCamX missed, and after several attempts to fix the issue with FitCamX, I gave up on it. A dashcam is for peace of mind, and I could trust that the device would work when needed. If you get the FitCamX, thoroughly test and periodically confirm that it is doing loop recordings. FitCamX as a company is reputable and well-intended. They refunded me the full amount without any prodding. We needed our camera to be hardwired because we want to record when the car is parked; this is a feature the FitCamX does not support.

My thought as well. The SD card must be the higher-quality Extreme or Industrial use. You may experience irratic behaviors that are unexplainable in some cases. The lower quality SD cards can be more exposed to vibration while writing to the card. The speed on the higher quality are much faster, ~190 Mbs per second enabling writing your video clips to the SD less read/write errors or video loss. The lower quality SD card writes about ~100Mbs per second also half the speed of the higher end. I have owned Viofo for at least ten years and have not been disappointed. The continue to add features or benefits to their product mix. I have undated the firmware to the latest version. Like any technology updating your firmware that is recommended by the OEM is key to any satisfaction. The A229 and 329 dash cams have very fast video and snapshot photos or parking mode. THIS would probably explain your to slow message when it reads the card or formats the card it sees a low speed transfer or read/write. Anyways, Best dash cam I have used.

Did you run the hardwire kit into the engine bay fuse box? I started to install an A229, but since all the interior fuses are always hot, I couldn't use those for fear of draining the battery. And the odb2 kit I tried to use was too short for the purpose. Running the line into the engine bay was more than I was comfortable with at the time, but seems the only option.

I have absolutely no idea why it failed. It wasn't baking in the sun, didn't fall, nothing of more. It just stopped turning on. I tried another power cable for it and still wouldn't turn on or anything. When I complained they offered a refund, not a replacement or repair so I never heard back what was wrong with it. I've had a viofo a229 since then and it's much better, no issues at all.

The new lenses are a game changer! This new 4K +60 FPS will be amazing to act as both recording high quality video clips for my drives in the desert while also have the security of a dash cam! I love the customer service of the VIOFO UAE team. They really know their stuff, and they helped me pick out some models for friends and family. They answered every query I had, which is super rare these days, and the Installation was easy. What I would love to see in future models is a screen-free model, since many of my friends and family are seniors, and they don't want additional screens occupying the windshield. A discrete model that just covers the front and rear will be a great addition to the current lineup. I understand this may be challenging to implement, as the control module needs some space. My recommendation would be to have a covered control box that could be hidden under the dashboard. And the camera unit itself could be really slim and attached to the control box through cables. Just how we currently implement rear-view cams. Just the camera lens running the wires to the front unit, which is acting as both front camera and control box. Doesn't have to be 4k or even 2K units, even a simple 1080P Unit would be useful to act as a security feature and number plate readings. Huge fan of the VIOFO A229 lines, would love one for my personal car!

Installation could be dead simple if you arent hardwiring, I would just use the usb port in the glove box. But if youre hardwiring, its fairly straightforward. Hardest part is tucking the cables under the headliner as its pretty tight. The most consistent and best dash cam Ive used has been the viofo a229, get the cam with the amount of cameras you want/need and get the hardwire kit. For the 718, theres two empty slots that you just use the add a fuse on that comes with the kit