A329 2CH

Nice CX-5 ..enjoy! Looks like the top Signature trim too with nappa leather - very nice! But that's no 2026 that being released practically everywhere else so why I wanted to clarify. Which is a good thing as you'll have plenty of readily accessible accessories to choose for it. I'd start with the rubber/all-weather floor mats from Mazda, and the cargo retractable cover to keep your cargo area private. If you don't like the rubber mats, check out [TuxMats](https://www.tuxmat.com/products/8360-mazda-cx-5-custom-mat?variant=43282579783740&year=2025) from Canada. For dash camera, anything [VIOFO](https://www.viofo.com/collections/2-channel-front-rear) makes great dash cameras. See r/Dashcam for their advice and discussion as well. A great one is the A329 and A229 Ultra or Pro if that fits your budget - I prefer the 2-cameras kit for the rear view too as too many times accidents are occuring from the rear to capture. If you're handy and DIY, you can apply a ceramic coating as well to make washing quicker, or go with a [spray on ceramic coating](https://www.amazon.ae/Turtle-Wax-53409-SOLUTIONS-CERAMIC/dp/B07XYPS3PS/) which lasts about 9 months for me. You can install a [car starter](https://www.amazon.ae/Start-X-Starter-2014-18-2014-21-Vehicles/dp/B08XYF618C/) where using the mazda keyfob (pressing Lock 3x) you can start the engine without paying for Mazda's Connect monthly fees.

I have the Viofo A329 2 channel. Love it.

If you want something no-compromise, get a Viofo A329 2ch with a battery pack. 4K 60fps Starvis 2 sensor in front, 2K Starvis 2 sensor rear, with battery pack you'll get about 16-18 hrs of parking mode recording.

https://www.viofo.com/products/viofo-a329s-2ch-4k-60fps-2k-hdr-dash-cam-with-sony-starvis-2-sensor This is the one we have for our XC90 and XC60

I've personally bought the [VIOFO A329SW 2CH](https://www.viofo.com/products/viofo-a329sw-2ch-4k-60fps-2k-waterproof-rear-camera-with-sony-starvis-2-sensor?variant=41717296398399). with a 512gb sd card. So far, happy about it. The rear cam is above the licence plate, right of the EU speck rear camera.

Super easy to do yourself, lots of good videos on YouTube for every possible car. You can mirror tap or fusebox tap for power if you want a hidden install too. I'm on my second viofo, started with a A129 and recently upgraded. I absolutely love the A329 2ch. I have it set to Vortex recommend settings, and hooked up to a 2TB T7 Shield SSD. I just want the 3rd channel now that it's released, thinking of getting the telephoto and waterproof camera..... I'd be willing to sell my A329 2ch to a homie on here with all the new mounts/cables/etc, it's two months old. I'd be able to reuse my already installed cables and mounts if I upgraded, so you'd get brand new accessories

Check out the VIFO A329

Here is a link to it. I got the 2 channel version and even though I frequently do all kinds of work on my vintage cars, I elected to take my new R4P to a body shop I've used (who are accustomed to removing and replacing interior panels) to install the wiring kit I bought along with it for the power and rear camera wiring. This is one of those things that I just wanted to work without a bunch of fiddling so I also ordered their high endurance memory even though it costs a bit more because some people that have had their cameras for a while reported problems with more generic memory cards. As others have said, you have to have both switched power and continuous power applied to it via two fuse taps or, as is the case in one installation video I found, by splicing into the OBD2 port wiring, to use the parked monitoring capability which is configurable. Since the camera has no internal battery, there really is no way around this requirement. [https://www.viofo.com/products/viofo-a329-2ch-first-4k-60fps-front-and-2k-rear-wi-fi-6-dash-cam-hdr-with-sony-starvis-2-sensors-support-ssd-storage](https://www.viofo.com/products/viofo-a329-2ch-first-4k-60fps-front-and-2k-rear-wi-fi-6-dash-cam-hdr-with-sony-starvis-2-sensors-support-ssd-storage)