ATK - Liekong U2 Ultra

Ring finger and pinky are together, which is a relaxed grip more common in palm grippers. Fingers are fully extended. Like rocketjumpninja. Only not relaxed thing is your bent thumb angle. U2 has a nice thumb groove that might feel nice. Atk u2 is basically a clone. Check it out on eloshapes. Valkyrie vk m3 and atk u2 mini are smaller "U3" size options.

That's a fingertip mouse, but the Darmoshark M3 Micro is like a full sized mouse just shrunken down and fairly light at less than 45 g but if you battery mod it it'll get a lot lighter because the stock battery is really heavy. Honestly for a cheaper option I would say the ATK U2 Mini is a good option at 40 g as I like the normal sized version with my 18.7 cm x 9.8 cm hands.

U2 Pro/Ultra 47$/70$ on Ali - sub 50 g, good sensor, big skates with reasonable control for competitive gaming, really grippy with ergo thumb groove. Uranus Pro 45$ - most similar to Basilisk with nice booty to grab! Not quite as good of a shape as the OG Roccat shape it copies but it’s close and only 55 g.

give us your style of gripping the mouse so that the mouse enthusiasts here will give you recommendation based on shapes. Unless you already have a preferred mouse shape, if so, drop it in the comments. At this price point you can;t go wrong with Atk X1, VXE R1, ATK U2, and ATK A9. It comes down to shape. And make sure to stay away from Attack Shark

so wider back and thinner grip width until the front. Well not much tbh especially in that size range, I can only give you zowie u2 or atk u2 as the options

I got atk U2 on AliExpress for 28$ and atk a9 for 18$

Also sensor isnt very important.. AMBI MICE M724 for cheap good safe shape (rival 3 clone but little smaller), But i wud up the budget and get vxe r1 (very safe shape), atk a9 2600rs very safe shape, atk x1 se 2.6k good shape for larger hands and claw not the safest, atk u2 2700rs not a safe shape good for aggressive claw ERGO MOUSE If ur decided to get an ergo mouse get asus tuf m3 gen 2 flipkart 1.6k miles better than deathadder essential. No other cheap ergo mouse in that budget in india. Dav3 wired is 3k rn with card discount if u want ergo again. Smaller ergos are expensive like ec3 and deathadder v3 hyperspeed except tuf m3 gen 2. M3 gen 2 and deathadder v3 wired are phenomenal ergo shapes for the price of 1.6k and 3k

my atk u2 had bad skates problem but my atk f1 is perfect other friends of mine with atk have no problems as well

I think if you are willing to navigate chinese mice, they will work fine for your needs. I personally didn't have bad experiences with atk or mchose. They aren't like sister brands or anything to my knowledge. And they can often be locally available. - Which I would actually recommend, I am not a big believer in chinese mice support and would rather deal with importers. Depending on local consumer protections, you might want to import yourself. As for the specific model, ATK had something like Rival3+ shape in that it was slightly more filling to the hand. Sadly I don't remember it exactly. Maybe U2? My personal favorites are F1 and Z1. F1 is the default mouse shape. Z1 is a bigger one that's more ergonomic. Other chinese mice are also fine. It is basically web drivers for most of them. They are all similar internally so I'd say go with one that is locally available, looks somewhat interesting or pretty to you. It is harder to find something that doesn't work than one that does in mice these days. They all come with usb c and support for over 1k hertz. The only brand I don't like, that's somewhat widely available, is Ajazz. I've used a few of their products over the years, never felt quite as good as the others. The rest either improved drastically to be good or were always good enough. Sorry about not being able to name a specific model exactly. But I hope it helps narrow it down for you if nobody else helps out. If you want to dig through shapes, eloshapes is a good resource. They have comparison tools and such.

Here's a few 30$ or less solid mice all sub 60g. * Lethal LA-1: Original shape, good for all grip types, my personal favorite on this list. Lethals first attempt at aouse has a small flexing issue on the side, its unlikely to ever come up in regular usage, but caused them to drop the price. Its a solidly thin claw shape with a larger solid rear hump, basically a scaled up OP1 which feels great to use. * ATK X1: Viper V3 Pro clone shape, a larger hourglass with solid feelnfor any grip style and a good coating. It'll have a 3395 SE which is basically a 3311, perfectly fine in most cases just dont go above 1600 dpi. * ATK A9: Logitech G Pro Superlight clone shape. Larger potato shape great for all grip types though large for fingertip yet some still do. The A9 SE and normal A9 are 25$ and 30$ respectively though neither will have a coating and will have a 3311 ad 3395 SE. * VXE R1: X2 Medium clone shape, larger flatter sides great for all grip styles. No model sub 30$ will have a coating yet the normal R1 that is sub 30$ has a 3395. * Delux M600: Viper Mini clone shape, smaller and solid for fingertip and claw but a bit small for palm. Not sure the internals and harder to find with no coating but solid implementation on the model I got. * Phylina S450: HTS+ Clone shape, larger middle hump with hourglass shape and deeper curves, Great for all grip types though difficult to fingertip with its height. There's a chance the model you get wont have function software its a toss up, 3395 no matter the model. * Attackshark X3: Original hourglass shape, smaller than other mice solid for all grip types. Probably the worst QC on his list but the pro model isn't terrible. 3395 with a good implementation, the pro model is better but slightly more expensive closer to 35$, where yoy can find the original as low as 12$ at times. * Attackshark R1: Razer Deathadder V3 Mini shape clone, palm and claw. Really cheap at 16$ usually packing a 3311. * Metaphyuni P1: Exact shell as Attackshark R1, but better sensor at higher price can be found at 30$. * Metaphyuni P2: Zowie U2 clone shape, solid for claw and palm. Huge rear hump and flare makes it great for getting solid palm contact for a claw or palm grip, curves to aggressive for other options, gotta hunt for deals on that one. * ATK U2: Zowie U2 Clone shape unsurprisingly. Solid coating on all models, newer so harder to find good deals for but older sensors like a 3311 in the sub 30$ model. * Ajazz The Entire Company: Ajazz isn't the best quality. Ajazz isn't even good quality. They are lower range okay mice but offer an *extremely* wide variety of mice in different shapes (usually clones) for low prices. Those are all the ones that come to mind off the top of my head. There's certainly more like RAWM and other companies and if you just look up 3395 on Aliexpress you'll see shitloads. Keyboard wise you can get the Madlions Hall Effect Wooting clone for about 50$.

Here's a few 30$ or less solid mice all sub 60g. * Lethal LA-1: Original shape, good for all grip types, my personal favorite on this list. Lethals first attempt at aouse has a small flexing issue on the side, its unlikely to ever come up in regular usage, but caused them to drop the price. Its a solidly thin claw shape with a larger solid rear hump, basically a scaled up OP1 which feels great to use. * ATK X1: Viper V3 Pro clone shape, a larger hourglass with solid feelnfor any grip style and a good coating. It'll have a 3395 SE which is basically a 3311, perfectly fine in most cases just dont go above 1600 dpi. * ATK A9: Logitech G Pro Superlight clone shape. Larger potato shape great for all grip types though large for fingertip yet some still do. The A9 SE and normal A9 are 25$ and 30$ respectively though neither will have a coating and will have a 3311 ad 3395 SE. * VXE R1: X2 Medium clone shape, larger flatter sides great for all grip styles. No model sub 30$ will have a coating yet the normal R1 that is sub 30$ has a 3395. * Delux M600: Viper Mini clone shape, smaller and solid for fingertip and claw but a bit small for palm. Not sure the internals and harder to find with no coating but solid implementation on the model I got. * Phylina S450: HTS+ Clone shape, larger middle hump with hourglass shape and deeper curves, Great for all grip types though difficult to fingertip with its height. There's a chance the model you get wont have function software its a toss up, 3395 no matter the model. * Attackshark X3: Original hourglass shape, smaller than other mice solid for all grip types. Probably the worst QC on his list but the pro model isn't terrible. 3395 with a good implementation, the pro model is better but slightly more expensive closer to 35$, where yoy can find the original as low as 12$ at times. * Attackshark R1: Razer Deathadder V3 Mini shape clone, palm and claw. Really cheap at 16$ usually packing a 3311. * Metaphyuni P1: Exact shell as Attackshark R1, but better sensor at higher price can be found at 30$. * Metaphyuni P2: Zowie U2 clone shape, solid for claw and palm. Huge rear hump and flare makes it great for getting solid palm contact for a claw or palm grip, curves to aggressive for other options, gotta hunt for deals on that one. * ATK U2: Zowie U2 Clone shape unsurprisingly. Solid coating on all models, newer so harder to find good deals for but older sensors like a 3311 in the sub 30$ model. * Ajazz The Entire Company: Ajazz isn't the best quality. Ajazz isn't even good quality. They are lower range okay mice but offer an *extremely* wide variety of mice in different shapes (usually clones) for low prices. Those are all the ones that come to mind off the top of my head. There's certainly more like RAWM and other companies and if you just look up 3395 on Aliexpress you'll see shitloads

Here's a few 30$ or less solid mice all sub 60g. * Lethal LA-1: Original shape, good for all grip types, my personal favorite on this list. Lethals first attempt at aouse has a small flexing issue on the side, its unlikely to ever come up in regular usage, but caused them to drop the price. Its a solidly thin claw shape with a larger solid rear hump, basically a scaled up OP1 which feels great to use. * ATK X1: Viper V3 Pro clone shape, a larger hourglass with solid feelnfor any grip style and a good coating. It'll have a 3395 SE which is basically a 3311, perfectly fine in most cases just dont go above 1600 dpi. * ATK A9: Logitech G Pro Superlight clone shape. Larger potato shape great for all grip types though large for fingertip yet some still do. The A9 SE and normal A9 are 25$ and 30$ respectively though neither will have a coating and will have a 3311 ad 3395 SE. * VXE R1: X2 Medium clone shape, larger flatter sides great for all grip styles. No model sub 30$ will have a coating yet the normal R1 that is sub 30$ has a 3395. * Delux M600: Viper Mini clone shape, smaller and solid for fingertip and claw but a bit small for palm. Not sure the internals and harder to find with no coating but solid implementation on the model I got. * Phylina S450: HTS+ Clone shape, larger middle hump with hourglass shape and deeper curves, Great for all grip types though difficult to fingertip with its height. There's a chance the model you get wont have function software its a toss up, 3395 no matter the model. * Attackshark X3: Original hourglass shape, smaller than other mice solid for all grip types. Probably the worst QC on his list but the pro model isn't terrible. 3395 with a good implementation, the pro model is better but slightly more expensive closer to 35$, where yoy can find the original as low as 12$ at times. * Attackshark R1: Razer Deathadder V3 Mini shape clone, palm and claw. Really cheap at 16$ usually packing a 3311. * Metaphyuni P1: Exact shell as Attackshark R1, but better sensor at higher price can be found at 30$. * Metaphyuni P2: Zowie U2 clone shape, solid for claw and palm. Huge rear hump and flare makes it great for getting solid palm contact for a claw or palm grip, curves to aggressive for other options, gotta hunt for deals on that one. * ATK U2: Zowie U2 Clone shape unsurprisingly. Solid coating on all models, newer so harder to find good deals for but older sensors like a 3311 in the sub 30$ model. * Ajazz The Entire Company: Ajazz isn't the best quality. Ajazz isn't even good quality. They are lower range okay mice but offer an *extremely* wide variety of mice in different shapes (usually clones) for low prices. Those are all the ones that come to mind off the top of my head. There's certainly more like RAWM and other companies and if you just look up 3395 on Aliexpress you'll see shitloads

ATK u2. Fits my hand perfectly. Still not 100% sold on it, but it feels great.