X1 Pro Max

Currently using ATK Sky X1 Ultimate nil issues so far had since August '25 had ATK Sky X1 Pro Max since Sept '24 nil issues. Had Deathadder v3 Pro before that lasted few years. G520 prior to that like a tank. If your rough even with a durable mouse you'll still break it seen so many people smash their razors/logitechs over the years lol.

So I wanted the Razer Viper v3 pro however the cost of these are ridiculous (UK c.£160) - after some googling etc I stumbled upon a chinese mouse 'ATK X1 Pro Max' which is VERY similar to the Razer with margianal differences. It's lightweight, comfortable, buttons feel nice with good placement, decent battery life and cost £100 less than the Razer V3!! I got mine from Aliexpress for £60, do some research but I highly recomend.

PixArt is the maker, PAW is the sensor line up and the numbers like 3395 is the model. anyways the r1 is decent enough for casual but buy at least the pro/pro max model for better coating and sensor:)

Buy the VXE MAD R+ from meckeys It's 5200 currently. I have been using it for like 14 months, no issues faced until now, you dont even have to install a specific driver cause it has web driver support. 42g lightweight 8000hz wireless and 1k hz wired. I will say its the best in its price range. Of course you can buy the atm x1 pro too that's a great light weight mouse too with 8k hz capability

Atk x1

Atk and attack shark are different brands. ATK Blazing Sky X1 is the mouse I'm talking about.

The best variant of the atk x1 or a9 that your budget allows. Both are very safe shapes. I have both mouses so feel free to ask me about them.

My copy paste list * Incott Ghero Pro: Solid Mouse that feels like a GPX Ergo (or NP-01 Clone) and is extremely solidly build while staying price wise at 50$ * VGN Dragonfly F1: Solid orignial shape with a larger rear hump on the end that curves more inwards before coming out at the front, very safe shape at 46$ * Hitscan Hyperlight: Solid middle hump with great curves keeping it solidly usable for any and all grip styles. One of the best on market at 80$ * ATK Blazing Sky F1: Stolen variation of an earlier model of The Hitscan it's got a much larger mid hump with substantial curves as it comes into the front while going thinner towards it with lowered clicks. Is 38g and has a 3950 sensor but is usually a full 70$ * Darmoshark M3S: Solid Viper styled shape with those same bell curves, usually around 40$ * Zaopin Z2: Solid ergo light with a much smaller ergo feel yet still has a nice rounded bump and curve to it for the ergo feel at 50$ * Endgame Gear OP1 Wired: This is what a lot of mice are based on as EGG has some of the better mice on market in terms of quality and built and software. It's one of the best mice you can buy. It is wired but if you don't care about 4k or 8k it's perfectly fine at 45$ * VXE R1: Nearly identical to the Pulsar X2V2 it's got a super solid feel and the pro model has a better coating and overall well implemented sensor. Considered the king of the budgets it's 50$ for the Pro and as low as 20$ for not pro. * VXE Mad R: Identical to the mouse above in shape its another X2V2 clone perfect at 38g great for all grip styles, the Major verision has a 3950 sensor and is 45$ for normal, 63$ for Major, if you can grab this over the normal R1. * Incott HPC02M: is a X2 clone with supersolid build quality and the ability to swap the switches with ease. 55$ * Incott G23: GPX clone with hotswappable switches at 50$ * Scyrox V8: Sora V2 clone at 38g with a 3950 built for claw, can be found for 70$ * ATK Blazing Sky X1: Viper V3 clone with 3950 and solid build quality right at the 70$ price range. * Incott G24: Zowie EC2 Clone that's hotswap and solid weight can be found for 70$ * Mchose L7: 38g with a shape somewhere between the Lamzu Atlantis and X2V2. It has flatter sides but still a larger rear curve to lock in slightly better than something like the Mad R while still feeling very premium. Basic model has 3395 for 45$ and pro is closer to 60$ for 3950. * Lethal LA-1: Basically a larger OP1. Same kind of curves but a larger overall feel, due to having some very small issues with the batch and to compete with budget mice it can now be found for 30$. * Scyrox V6: Very Solid HTS+ clone both at around 40g with full 8k and solid internals, with a splid rear hump and hourglass greay for all grip types. Very good overall and some of the best budget out there. 70$ * Attackshark R6: Same shape and weight and sensor as the Scyrox V8 and Sora V2 and the only real mouse from Attackshark I reccomend for 55$ * ATK A9: Best Superlight clone on market feels extremely good in hand can be found for as low as 20$ but I reccomend at least getting the Plus for a 3395 and coating at 30$, if you go beyond that it can be a very good exact GPX clone with 8k polling. * Mchose M7: Zowie U2 clone very solidly built great for claw with a larger rear hump can be found for 50$ * Ipi Float: traditional hourglass shape much akin to a finalmouse on a budget, solo for roughly 60$ * ATK U2: A zowie U2 clone that's extremely accurate and feels good in the hand massive changes for a class shake with a large rear hump. * VGN Y2: NP-01s come that's very solid, good ergo shape that's in-between a full ergo and a symmetrical one. * Ajazz: the entire company makes a massive variety of shapes. While their quality is by no means the best they have a varied amount of shapes with considering all at budget prices just try to get a 3395 model and don't expect a coating. For all ATK or VXE always try to at minimum get ones with a coating and 3395 sensor. If you can't tell which model had that check their list they always have in their websites. It should be a big box of all their model differences.

Here's a few 30$ or less solid mice all sub 60g. * Lethal LA-1: Original shape, good for all grip types, my personal favorite on this list. Lethals first attempt at aouse has a small flexing issue on the side, its unlikely to ever come up in regular usage, but caused them to drop the price. Its a solidly thin claw shape with a larger solid rear hump, basically a scaled up OP1 which feels great to use. * ATK X1: Viper V3 Pro clone shape, a larger hourglass with solid feelnfor any grip style and a good coating. It'll have a 3395 SE which is basically a 3311, perfectly fine in most cases just dont go above 1600 dpi. * ATK A9: Logitech G Pro Superlight clone shape. Larger potato shape great for all grip types though large for fingertip yet some still do. The A9 SE and normal A9 are 25$ and 30$ respectively though neither will have a coating and will have a 3311 ad 3395 SE. * VXE R1: X2 Medium clone shape, larger flatter sides great for all grip styles. No model sub 30$ will have a coating yet the normal R1 that is sub 30$ has a 3395. * Delux M600: Viper Mini clone shape, smaller and solid for fingertip and claw but a bit small for palm. Not sure the internals and harder to find with no coating but solid implementation on the model I got. * Phylina S450: HTS+ Clone shape, larger middle hump with hourglass shape and deeper curves, Great for all grip types though difficult to fingertip with its height. There's a chance the model you get wont have function software its a toss up, 3395 no matter the model. * Attackshark X3: Original hourglass shape, smaller than other mice solid for all grip types. Probably the worst QC on his list but the pro model isn't terrible. 3395 with a good implementation, the pro model is better but slightly more expensive closer to 35$, where yoy can find the original as low as 12$ at times. * Attackshark R1: Razer Deathadder V3 Mini shape clone, palm and claw. Really cheap at 16$ usually packing a 3311. * Metaphyuni P1: Exact shell as Attackshark R1, but better sensor at higher price can be found at 30$. * Metaphyuni P2: Zowie U2 clone shape, solid for claw and palm. Huge rear hump and flare makes it great for getting solid palm contact for a claw or palm grip, curves to aggressive for other options, gotta hunt for deals on that one. * ATK U2: Zowie U2 Clone shape unsurprisingly. Solid coating on all models, newer so harder to find good deals for but older sensors like a 3311 in the sub 30$ model. * Ajazz The Entire Company: Ajazz isn't the best quality. Ajazz isn't even good quality. They are lower range okay mice but offer an *extremely* wide variety of mice in different shapes (usually clones) for low prices. Those are all the ones that come to mind off the top of my head. There's certainly more like RAWM and other companies and if you just look up 3395 on Aliexpress you'll see shitloads. Keyboard wise you can get the Madlions Hall Effect Wooting clone for about 50$.

Here's a few 30$ or less solid mice all sub 60g. * Lethal LA-1: Original shape, good for all grip types, my personal favorite on this list. Lethals first attempt at aouse has a small flexing issue on the side, its unlikely to ever come up in regular usage, but caused them to drop the price. Its a solidly thin claw shape with a larger solid rear hump, basically a scaled up OP1 which feels great to use. * ATK X1: Viper V3 Pro clone shape, a larger hourglass with solid feelnfor any grip style and a good coating. It'll have a 3395 SE which is basically a 3311, perfectly fine in most cases just dont go above 1600 dpi. * ATK A9: Logitech G Pro Superlight clone shape. Larger potato shape great for all grip types though large for fingertip yet some still do. The A9 SE and normal A9 are 25$ and 30$ respectively though neither will have a coating and will have a 3311 ad 3395 SE. * VXE R1: X2 Medium clone shape, larger flatter sides great for all grip styles. No model sub 30$ will have a coating yet the normal R1 that is sub 30$ has a 3395. * Delux M600: Viper Mini clone shape, smaller and solid for fingertip and claw but a bit small for palm. Not sure the internals and harder to find with no coating but solid implementation on the model I got. * Phylina S450: HTS+ Clone shape, larger middle hump with hourglass shape and deeper curves, Great for all grip types though difficult to fingertip with its height. There's a chance the model you get wont have function software its a toss up, 3395 no matter the model. * Attackshark X3: Original hourglass shape, smaller than other mice solid for all grip types. Probably the worst QC on his list but the pro model isn't terrible. 3395 with a good implementation, the pro model is better but slightly more expensive closer to 35$, where yoy can find the original as low as 12$ at times. * Attackshark R1: Razer Deathadder V3 Mini shape clone, palm and claw. Really cheap at 16$ usually packing a 3311. * Metaphyuni P1: Exact shell as Attackshark R1, but better sensor at higher price can be found at 30$. * Metaphyuni P2: Zowie U2 clone shape, solid for claw and palm. Huge rear hump and flare makes it great for getting solid palm contact for a claw or palm grip, curves to aggressive for other options, gotta hunt for deals on that one. * ATK U2: Zowie U2 Clone shape unsurprisingly. Solid coating on all models, newer so harder to find good deals for but older sensors like a 3311 in the sub 30$ model. * Ajazz The Entire Company: Ajazz isn't the best quality. Ajazz isn't even good quality. They are lower range okay mice but offer an *extremely* wide variety of mice in different shapes (usually clones) for low prices. Those are all the ones that come to mind off the top of my head. There's certainly more like RAWM and other companies and if you just look up 3395 on Aliexpress you'll see shitloads

Here's a few 30$ or less solid mice all sub 60g. * Lethal LA-1: Original shape, good for all grip types, my personal favorite on this list. Lethals first attempt at aouse has a small flexing issue on the side, its unlikely to ever come up in regular usage, but caused them to drop the price. Its a solidly thin claw shape with a larger solid rear hump, basically a scaled up OP1 which feels great to use. * ATK X1: Viper V3 Pro clone shape, a larger hourglass with solid feelnfor any grip style and a good coating. It'll have a 3395 SE which is basically a 3311, perfectly fine in most cases just dont go above 1600 dpi. * ATK A9: Logitech G Pro Superlight clone shape. Larger potato shape great for all grip types though large for fingertip yet some still do. The A9 SE and normal A9 are 25$ and 30$ respectively though neither will have a coating and will have a 3311 ad 3395 SE. * VXE R1: X2 Medium clone shape, larger flatter sides great for all grip styles. No model sub 30$ will have a coating yet the normal R1 that is sub 30$ has a 3395. * Delux M600: Viper Mini clone shape, smaller and solid for fingertip and claw but a bit small for palm. Not sure the internals and harder to find with no coating but solid implementation on the model I got. * Phylina S450: HTS+ Clone shape, larger middle hump with hourglass shape and deeper curves, Great for all grip types though difficult to fingertip with its height. There's a chance the model you get wont have function software its a toss up, 3395 no matter the model. * Attackshark X3: Original hourglass shape, smaller than other mice solid for all grip types. Probably the worst QC on his list but the pro model isn't terrible. 3395 with a good implementation, the pro model is better but slightly more expensive closer to 35$, where yoy can find the original as low as 12$ at times. * Attackshark R1: Razer Deathadder V3 Mini shape clone, palm and claw. Really cheap at 16$ usually packing a 3311. * Metaphyuni P1: Exact shell as Attackshark R1, but better sensor at higher price can be found at 30$. * Metaphyuni P2: Zowie U2 clone shape, solid for claw and palm. Huge rear hump and flare makes it great for getting solid palm contact for a claw or palm grip, curves to aggressive for other options, gotta hunt for deals on that one. * ATK U2: Zowie U2 Clone shape unsurprisingly. Solid coating on all models, newer so harder to find good deals for but older sensors like a 3311 in the sub 30$ model. * Ajazz The Entire Company: Ajazz isn't the best quality. Ajazz isn't even good quality. They are lower range okay mice but offer an *extremely* wide variety of mice in different shapes (usually clones) for low prices. Those are all the ones that come to mind off the top of my head. There's certainly more like RAWM and other companies and if you just look up 3395 on Aliexpress you'll see shitloads

Here's a few 30$ or less solid mice all sub 60g. * Lethal LA-1: Original shape, good for all grip types, my personal favorite on this list. Lethals first attempt at aouse has a small flexing issue on the side, its unlikely to ever come up in regular usage, but caused them to drop the price. Its a solidly thin claw shape with a larger solid rear hump, basically a scaled up OP1 which feels great to use. * ATK X1: Viper V3 Pro clone shape, a larger hourglass with solid feelnfor any grip style and a good coating. It'll have a 3395 SE which is basically a 3311, perfectly fine in most cases just dont go above 1600 dpi. * ATK A9: Logitech G Pro Superlight clone shape. Larger potato shape great for all grip types though large for fingertip yet some still do. The A9 SE and normal A9 are 25$ and 30$ respectively though neither will have a coating and will have a 3311 ad 3395 SE. * VXE R1: X2 Medium clone shape, larger flatter sides great for all grip styles. No model sub 30$ will have a coating yet the normal R1 that is sub 30$ has a 3395. * Delux M600: Viper Mini clone shape, smaller and solid for fingertip and claw but a bit small for palm. Not sure the internals and harder to find with no coating but solid implementation on the model I got. * Phylina S450: HTS+ Clone shape, larger middle hump with hourglass shape and deeper curves, Great for all grip types though difficult to fingertip with its height. There's a chance the model you get wont have function software its a toss up, 3395 no matter the model. * Attackshark X3: Original hourglass shape, smaller than other mice solid for all grip types. Probably the worst QC on his list but the pro model isn't terrible. 3395 with a good implementation, the pro model is better but slightly more expensive closer to 35$, where yoy can find the original as low as 12$ at times. * Attackshark R1: Razer Deathadder V3 Mini shape clone, palm and claw. Really cheap at 16$ usually packing a 3311. * Metaphyuni P1: Exact shell as Attackshark R1, but better sensor at higher price can be found at 30$. * Metaphyuni P2: Zowie U2 clone shape, solid for claw and palm. Huge rear hump and flare makes it great for getting solid palm contact for a claw or palm grip, curves to aggressive for other options, gotta hunt for deals on that one. * ATK U2: Zowie U2 Clone shape unsurprisingly. Solid coating on all models, newer so harder to find good deals for but older sensors like a 3311 in the sub 30$ model. * Ajazz The Entire Company: Ajazz isn't the best quality. Ajazz isn't even good quality. They are lower range okay mice but offer an *extremely* wide variety of mice in different shapes (usually clones) for low prices. Those are all the ones that come to mind off the top of my head. There's certainly more like RAWM and other companies and if you just look up 3395 on Aliexpress you'll see shitloads

BTW, ATK and VXE are the same so they have a Viper V3 Pro clone in the X1. It's also available on Amazon