CLOUDFORGE T7

AC Infinity humidifier works really well and some nice features https://acinfinity.com/hydroponics-growers/cloudforge-t7-environmental-plant-humidifier-15l-smart-controls-targeted-vaporizing/

Mine did too. Was going to use it in my 2x2 for drying, but no matter what I do it won't work because it thinks the water tank is missing. It is not.

So far, it is perfectly maintaining a 60% RH in a 2x2 full of my outdoor stalks hang drying.

I use a mister and humidifier. The enclosure is in a dry room, and has living plants so I've found it to need both. Mister is the Thrive model that hangs on the tank. Timer set for 8hrs and a 15 second duration. It's largely to water the plants to keep them moist but I also water individually as needed. And the humidifier is an AC Infinity one meant for a grow tent I had kicking around. It's connected to their Controller 69 which monitors the temperature and humidity, turning it off and on as needed along with the heat bulbs. But the humidity is set to 78% with a 5% variant.

Ac infinity all the way. Whatever you get, you want something that can modulate based on Vapor pressure deficit (VPD) not humidity. t3 is a good model for a cabinet

Get the AC infinity one. You can set it to a target. Best thing ever. And you can always red neck a bigger reservoir. It's about as powerful as I can get without going commercial. Altho with the app integration you could probably use a few of the bigger ones for smaller commercial ops