Black Hybrid Series One 12.5"

Beauty rest black series one plush. It’s got a great support will last a good 10 years minimum and is a good price point.

Hi, what is your suggestion for a queen size mattress for an adjustable bed. I tend to be a back or side sleeper and like a mattress on the firmer side of medium. Looking to spend under 2k with a base. Have a Beautyrest King hybrid 12.5, that is 5 yrs old and has hollowed out where I sleep and I'm only 145 lb, don't want to waste another 2k and have to replace it in 5 years again.

Buy direct from beautyrest they offer a refund protection plan https://www.beautyrest.com/products/black-hybrid-series-one-firm Beautyrest is a good brand I have a medium hybrid from them that’s not as nice as this one and I’ve liked it

How many hybrids and how many true memory foam I bought a quality beautyrest hybrid and have been very happy with it

My general recommendation would be to look at queen size mattresses over $1400 to filter out cheap mattresses There’s a lot more to it but that is a good starting point IMO I have liked my beautyrest hybrid a lot

Well, not the co-founder, but an integral part of their management team and I would be happy to help. I have slept on and tested several versions of the BR PS 1 and 2. I am a little heavier at 6' and 220 lbs, and for me, I was not impressed at all. That does not mean others will not have success with it, but it simply did not work for my wife and me. I have also found that many people who report issues with this series tend to have very similar complaints. I have coined what I experienced the “swimming pool cover” effect. The mattress uses a perimeter foam encasement, meaning a thick, high-density foam surrounds the spring support system. This is intended to provide a clean, squared-off look and firm edge support, something you are supposedly able to sit on comfortably while putting on shoes or socks. One of the primary issues is the stark contrast between the very firm edge foam and the primary sleeping surface. Once you move off the edge and onto the mattress, the experience changes significantly. The memory foam in the comfort layer is not particularly high quality, and as it warms up, it softens quickly and allows the sleeper to sink too deeply. Over time, this repeated sinking causes the mattress cover to stretch excessively. After several months, the stretched cover begins to take on a permanent sag in the main sleeping area, while the portion of the cover stretched tightly over the firm edge foam remains taut. Most people get into bed by sitting or leaning on the edge, placing a leg, hip, knee, or backside there, before rolling toward the center. By that point, the center has already softened and sunk, much like a swimming pool cover that sags in the middle after rain or snow collects on it. The result is that sleepers tend to roll toward the center, which has become the lowest point of the mattress, and gradually sink together. Great for newlyweds, perhaps, assuming you do not mind overheating while slowly sinking into softening memory foam. I also do not like the fact that when sleeping near the edge, you can end up with part of your body on the very firm perimeter foam and the rest on the much softer main sleeping surface. That mismatch in support and feel is uncomfortable and, in my experience, contributes to soreness. This is not just theory for me. I have a relative and a couple of friends who have purchased this series for their guest rooms, and whenever we stay with them, we consistently wake up with sore bodies. The foundation is your unsung hero of you bedding system. Most mattress folks find that sleepers will spend thousands on a mattress, and then go and by a poorly constructive and supportive foundation, that cripples the mattress. If you had the choice, finding a mattress that is a few bucks less expensive and transferring that expense to the foundation is a much safer and prudent option. An inadequate foundation will kill a good mattress, but a good foundation, can sometimes make an average at best mattress, seem like a luxury.

Although this is a little older and they have revamped the black series with some improvement, the main concept remains the same. Still a good support system, but too much questionable foam and microcoil placement. This is a good video reprentation.[beautyrest](https://youtu.be/cx9Acckb1ZM?si=7ON3fnq0lcjIJbER)

Take a look at Backscience. Depending on you size; height, weight, sleep position, all of this will determine what Backscience model or any brand's model for that matter, will be best. BS does a good job as they will customize the mattress based on you and your partner's preferences. It is designed by a current practicing Chiropractor. Your foundation is also a critical component and should not be overlooked. A bad foundation can become your mattress's nemesis and consequently a potential back killer. The right solution is a bit of a balancing act between robust support and comfort along with a supportive foundation and critical pillow selection.

I think this is a very naive way to approach buying a mattress. Sure, going into a store for ten minute mattress test can help eliminate something that feels obviously too soft or uncomfortable, but that short test tells you almost nothing about how a mattress will perform over months or years of actual sleep. Comfort is subjective, but durability, support design, foam quality, spring gauges, and overall construction matter a lot more than most people realize, especially for people dealing with back pain. It is not as simple as picking the shiniest mattress in a showroom and then hunting for the cheapest online price. Some people absolutely benefit from professional guidance, follow up service, and understanding how different materials affect long term comfort and alignment. There are also people who could sleep on a sack of topsoil and call it comfortable. For most mattress shoppers though, doing real research through resources like the FAQ here or places like Mattress Underground is worth the effort because everything between you and the floor matters.

Do not swap anything yet. 1 week is not enough time to evaluate firmness. It will soften. Call them and ask them to send you a free topper, temporarily, while you adjust. I am very familiar with the Midnight Elite and I own a ThermoBalance Elite (firm) for our guest room, it is a great comfortable mattress. Depending on your height and weight, that will determine how long it will take to adjust to. It’s important to remember that new mattresses often go through a break-in period. The firmness you feel in the first week is usually not indicative of how it will feel once it has settled; most mattresses soften slightly as the materials adjust to your body. Replacing it too soon with a softer mattress/comfort layer can create bigger problems later, like hammocking in the middle or relying on a topper that won’t adequately fix the support issues when a mattress is too soft. Give it a few weeks to fully settle before making any decisions, what feels too firm now may become perfectly comfortable once it has had time to adjust. I have posted about this previously. My daughter tested a Twighlight Luxe and Midnight luxe in a showroom. The Midnight felt firmer because it was new to the showroom floor and the Twilight had been there for almost a nine months. She is \~5'3 135, He is \~5'6 165. I ended up buying them the Twilight Luxe, knowing it would be firm for her. For him the Twilight was great right after expansion, it too her about 3 weeks to adjust (coming off an old mattress that had lost all support- that matters too). Now they both love it. I know everyone wants to feel great right out of the gate, and with some natural fibers that might happen, but synthetics are a bit different. Hang in there. I know it is easy for an outsider to say it, but you will be happier in the long run. Let the trial run 3/4's of it's course, then decide. You can always get a softer insert, but ask them for a topper it should help.

We like a firm mattress. We sleep on the Plank Luxe. I 6' 220 and my wife is 5'4 135. So were are on different sides of the weight spectrum. Having experienced the Helix Plus Elite and the Thermobalance Elite, although they both have heavy duty spring support systems, they are both in the medium-firm 7/10 level. Many folks automatically equate Plus sized mattress with super firm mattresses and that is not the case. I have to say the Thermobalance Elite and Helix Plus Elite feel quite similar. Whereas the Titan Plus Elite (our other guest room mattress) feels more luxury plush before you get to the support layer. Between the Helix Elite and TB Elite, they feel very similar to me. I like them both. Compared to my Plank Luxe, the Helix and TB are much more cushioned. Luxury Firm. Remember the Helix Elite line (except the plus) has ergoalign layer that adds lumbar support in the comfort area and in the spring support layer. This may be adding to the firmness you feel. I would not place much stock in the cooling ribbons. There is certainly science behind the concept, but when you dress the bed up, it is questionable that any of these types of cooling mechanisms as a solution for a hot sleeping bed. You are very light, so it ***will*** take longer for you to break the Midnight in. The gently crawling around on the bed might be a good idea to speed up the softening, but it will take longer at your weight.

Look, the S brands aren’t horrible, but they’re not as good as they once were. They still outsell most other brands, largely because their marketing is very good and they do an excellent job positioning their products. They capture a lot of buyers that way. That said, there’s still a pretty common theme when it comes to complaints. Good spring support, too much foam above them. More foam ends up having more sinkage. Personally, I’m not a big fan of Beautyrest or Sealy and most of the S brand lineup, even as a former owner of Sealy and Serta, but that goes back to 1980's until early 2000's, but not any more, hard pass. My previous mattress was a Sealy Posturepedic, and before that Serta Perfect Sleeper so I do have firsthand experience with them. My mother-in-law had a Beautyrest Black several years ago and the mattress only lasted about 14 months before it developed a pothole in the hip area. She bought it without asking me first. A painful disaster. After that, I ordered her a DLX Mattress Premier Hybrid. I went with a split-internal queen, firm on one side and medium on the other. She ended up loving the firm side. Unfortunately she only got about a year and a half on it before she passed away in November. But the mattress itself was still in perfect shape, no dips, no sagging, no soft spots, nothing. Still like new. That’s one reason I think it’s a great option. Being able to split the internal comfort layer is really useful, and they’re a great company to work with. I also like the GlacierSleep Apex. It has a nice 2" cushion top and sits around a medium firmness. Another one I think you might actually like is the Titan Plus Elite from Brooklyn Bedding. If you want to go outside BiB, there are some other solid companies worth looking at. BackScience makes a really good mattress and will customize each side, which can be a big plus for couples. Charles P. Rogers also makes a very nice mattress, and their Lifetime 8 is a mostly natural option. Then there is the latex lineup. Companies like European Sleep Works, Diamond Mattress with their Ethos Hybrid line, SleepEZ, Natural Dreams, and Arizona Premium Mattress all offer good latex options. Winndom is another brand worth mentioning. Their Azalea isn’t an all-natural mattress, but it’s still a solid product. There are honestly a lot of good options out there. When it comes to latex, though, you really have to try it first. Even if for a half hour in a showroom. It can be a bit tricky. Latex is extremely durable and offers great longevity, but it feels very different from traditional foams. You get a lot more pushback, even in softer to medium feels. Whatever you choose, take a close look at the construction. That matters more than the marketing. The mattress should be using quality foams, such as at least 1.8 lb high-density polyfoam in the comfort layers. If memory foam is used, I usually like to see a minimum of 4 lb density, and it’s important to know where they are using it in the mattress. Viscoelastic memory foam used as the comfort layer will usually sleep a bit warmer unless the mattress is designed with airflow or heat-dispelling channels. You may also get that stuck in quicksand hot lava feel. Some manufacturers place memory foam deeper in the mattress so it only engages during deeper compression, which can help with durability and temperature. I am a big fan of Shifman Mattresses, ViSpring, and I love the oh so expensive Hastens, cant say enough about the Hastens 2000T. If you want a mattress that you feel nothing, like floating on a cloud, keeping your body in alignment without feeling any pressure, for a mere $82k, this Hastens is the one you want.

Our last mattress was an $1100 Simmons Beautyrest Plush cal king. We got a good 19 years out of it although realistically should have replaced it at least 5 years ago. We just replaced it with a $2k Novaform Platinum Luxury Hybrid king from Costco that we got on the Christmas day sale for $1500. This thing is built like a tank. I fully expect to get at least ten years out of it but that's yet to be seen.