
eero
Pro 6 Series
Easy, reliable, smart home ready; but paid features.

Running these analyses costs money. Buy through my links to help keep lights on! I may get a small commission.
Couple of previous threads on this. Not sure how much of an upgrade it would be from my Orbi RBR10 https://www.reddit.com/r/buildapcsales/comments/1m4bdgi/networking_arris_surfboard_max_w121_triband_mesh/ https://www.reddit.com/r/buildapcsales/comments/1ktk3nl/router_arris_surfboard_max_w121_ax6600_4499_new/
Same. my original Orbi from precovid was garbage performance originally, but after about 6-8 months of continual firmware upgrade was WONDERFUL and blindly fast 880 on a 1GB , symmetric up/down . Rock solid unflappable. But, they stopped updating any firmware and my security software was screaming at me to patch holes. So I researched and almost no one can deal with the new Netgear stuff you and others mention here. So, I went with a pair of Asus ROG GT6's... Stable but otherwise disappointing performance. fantastic tweaking software, but despite this, just 'meh' overall. highly asymmetric performance: fast-ish – still only slightly faster than HALF of what the 5 year old Netgear got on the download. And it's horrible on the upload. So seriously disappointed in Asus. Everyone seems to think Ubiquiti is the best (within reason) and I'm going to sell my Asus Stuff and try that too. Thanks for your info.
I've had several meshes, all using wireless backhaul. First I had the Netgear Orbi mesh (wifi-5) that worked well for a few months, then Netgear made firmware upgrades mandatory, and put out some really bad firmware. Went to eero (wifi-5) after that, and that one never did work well for me. It worked, but not as well as I thought that it should have. I tried the eero Pro 6 mesh (wifi-6), and that was never stable. After that it was the Asus ZenWiFi AX (wifi-6), which worked really well here. The mesh that I'm using now, the ZenWiFi BT10 (wifi-7) is also working really well...the wireless MLO backhaul is very fast and has been stable. About as close to wired backhaul as I've seen, the speed at the remote node is very close to my ISP's provisioned speed. The latest firmware for the BT10 mesh has been great, but it took a few versions to get the degree of stability that I want. So, for me, yes, there have been ups and downs, but the Asus ZenWiFi meshes have been the best that I've had. Both have worked great with wireless backhaul, which is what I need. And have been stable and have provided whole house wireless coverage.
I went from an old Orbi RB system to the 770 and have loved it! Sorry to hear so many haven’t. But so far it’s been great for me all around.
I’ve used before netgear Orbi mesh WiFi 6 router with two satellites. Worked well. Expensive but I guess was worth. Still use it now in the apartment but with one satellite in the bedroom only just in case
I have to agree on “consumer” grade mesh systems, I have tried Asus and two different Netgear Orbi systems (last one cost me $1800 at the time) and all I get is headaches. They last for a month or so and then lose satellites and devices are always dropping until I reset it and then a week later all over again. So I decided instead of dropping another $1200-1800 on a Wifi 7 Consumer Mesh I would invest in Ubiquiti equipment, now I don’t have it running yet but will be using Mesh on the second floor AP as I don’t care if it’s full speed or not.

eero
Pro 6 Series
Easy, reliable, smart home ready; but paid features.

TP-Link
Deco XE75 Pro
Great coverage, easy; but unreliable Ethernet, poor app.

eero
eero Max 7
Incredibly fast, reliable; but very expensive, limited control.

eero
eero Pro 7
Fast, reliable; but paid features, needs internet to function.

eero
eero 7
Easy, reliable coverage; but no 6GHz, paid features.