P10 Pro

My P10 couldn't recognize the power cord at all (actually, it's the water outlet cord of small appliances; I have a little washing machine and a robot vacuum cleaner's water outlet cords in the kitchen). The camera is completely unusable. And it cannot detect when it is tangled in wires and needs to get out of trouble. I wonder how the P20 performs. My P10 is stupid

I got two roboroks from target . They are both working fabulous . I got the roborock qrevo pro and the q10 pf+ The qrevo pro was 599 and that one I use downstairs for mopping and vacuuming . It’s works fabulous The q10pf + was 279 and I use it upstairs just for vacuuming. I have all carpeting upstairs . It can mop but I don’t use that feature . Point is, that I just went out and got one cause if you overthink it , you’ll never get one . It’s not that deep of a decision and I gave myself decision paralysis trying to find a good one . Everyone had their own opinions and in all reality , they are all pretty good . Go out , buy one , almost all stores you can bring something back within 30 days . Try it out , if you don’t like it , return it within 30 days . Good luck !

This is my experience with a roborock Q10Pf+. I mean i’d still take it over manually vaccumming dog hair any day but it is a damn headache. It’s also run over dog shit twice spreading throughout the entire house

Hi everyone, I’m trying to decide between the **Roborock Qrevo Curv 2 Flow** and the **Qrevo Pro 2**, and I’d really appreciate some real-world advice. Here’s my situation: * Apartment size: **\~144 m² (around 1550 sq ft)** * Flooring: mostly **ceramic tiles and vinyl (no carpets at all)** * No thresholds between rooms * Underfloor heating throughout the apartment * Large windows / very sunny side * Dark (black marble-style) tiles in some areas where **dust becomes visible very quickly**, sometimes even shortly after cleaning Because of the underfloor heating and sunlight, the floors tend to dry fast but also seem to make dust more noticeable. My main priorities are: 1. **Excellent dust pickup (especially fine dust)** 2. Very good mopping performance for tiles 3. Consistent daily cleaning without leaving streaks or residue on dark tiles 4. Reliable performance over a relatively large area (144 m²) Since I don’t have carpets, I’m less concerned about deep carpet performance and more about: * Hard floor suction efficiency * Edge cleaning * Mopping system quality (pressure, hot water, drying, etc.) * Dock features and maintenance effort From what I understand, the Curv 2 Flow has some upgrades, but I’m not sure if they would make a noticeable difference in a no-carpet, hard-floor-only environment like mine. For those who have experience with either (or both): * Is the Curv 2 Flow worth the extra money in this type of setup? * Would the Pro 2 be more than enough for tiles + daily dust control? * Any issues with fine dust on dark tiles? Thanks in advance for any insights!

I ended up going with the **Qrevo Pro 2**, and I have to say – I’m more than satisfied. Honestly, I’m pretty impressed. For my setup (144 m², mostly tiles and vinyl, no carpets, underfloor heating everywhere), it’s been performing extremely well. The suction on hard floors is excellent, especially for fine dust. I have some dark, marble-style tiles where dust becomes visible very quickly, and the Pro 2 handles them surprisingly well. After daily cleaning, the floors look consistently clean without streaks or residue. The mopping performance on tiles is also very solid. With regular runs, it keeps everything fresh and spotless, and I haven’t felt like I’m missing out on anything by not choosing the Curv 2 Flow. For a no-carpet environment focused on dust control and good tile mopping, the Pro 2 feels more than enough. The dock is convenient, maintenance is minimal, and overall it just does its job reliably across the full 144 m² without issues. In short: I’m genuinely impressed with the Pro 2 and would absolutely choose it again for this kind of setup.

I ended up going with the **Qrevo Pro 2**, and I have to say – I’m more than satisfied. Honestly, I’m pretty impressed. For my setup (144 m², mostly tiles and vinyl, no carpets, underfloor heating everywhere), it’s been performing extremely well. The suction on hard floors is excellent, especially for fine dust. I have some dark, marble-style tiles where dust becomes visible very quickly, and the Pro 2 handles them surprisingly well. After daily cleaning, the floors look consistently clean without streaks or residue. The mopping performance on tiles is also very solid. With regular runs, it keeps everything fresh and spotless, and I haven’t felt like I’m missing out on anything by not choosing the Curv 2 Flow. For a no-carpet environment focused on dust control and good tile mopping, the Pro 2 feels more than enough. The dock is convenient, maintenance is minimal, and overall it just does its job reliably across the full 144 m² without issues. In short: I’m genuinely impressed with the Pro 2 and would absolutely choose it again for this kind of setup.

So far we love it. Ended up getting the pet pro qrevo. It keeps the house very clean with 3 cats. Just the little while that we have had it, it's surpassed my expectations👌🏻

Roborock quest pro (not the S Pro) is better for hardwood floors than the S Pro as it washes and drys the mop. I swear by it. I was looking specifically related to hardwood floors and tile, and got it for around $450 from target. I’ve used it 107 hours covering 4.1k meters squared. I’ll place in specific carpet rooms for carpet tasks but I’ve improved programming the rooms. It looks like a cleaning service has come over daily. Almost no maintenance as well! I l swear by it. Dm me as if interested in the research info with parameters under $750

Nice deal. I got a pro version about 6 months ago for $315. Great little vacuum!

It was an open box item, EBay https://preview.redd.it/fngfpm6pokfg1.png?width=1982&format=png&auto=webp&s=48566879a656455943af4cf8509069ce1889921b