Samsung - Bespoke Jet Bot Combo AI

The jet bot AI is good for a laugh. I had a good time reviewing it. Piece of junk.

Vacuum wars said Samsung Jetbot AI was good. I tested it, it's embarrassing how bad it is.

I have an older Everybot 3i as well as a newer Bespoke AI Jet Bot Combo. I prefer the Everybot as it's round and has no problems maneuvering around things. The Bespoke has a square front and constantly catches the corner on things while trying to maneuver and will back up 2 to 3 times while trying to solve it's problem. Bottom line is the Everybot will hands down beat the Bespoke by a noticeable faster finish. The Bespoke can handle your size requirement no problem. My Everybot is running on about 65% of it's battery life at full charge now (maybe 6 years old or even more) so no to it.

Samsung Bespoke Jet Bot Combo AI+ 3-in-1 is fantastic.

Not sure where the downvotes are coming from, I’ve got the same one and it’s great.

I already bought Samsung bespoke vacuum bot with station. It can be programmed via the app, empties its dustbin at the station after vacuuming, and washes and dries its mops after each mop. These are important features.

We have a Samsung Bespoke Jet Bot which is very helpful!

The best robots I've had so far are the Roborock Qrevo Curv and Qrevo Curvx that I use on a daily basis. Roborock is just consistently good and they are my default brand now. The curvx got off to a rough start that required a reset and two remaps but it finally got it together. I had a Dreame X50 Ultra that died on day two and a Aqua10 Ultra Roller that was beyond terrible with tons of issues and their support was horrid so I won't be inclined to try them again. I had a eufy x10 omni pro and it was okay until it wasn't and right after that I tried a Samsung Bespoke jet bot ai and it went crazy on its first cleaning run and died in the hallway. I also had a shark matrix and it was okay until it went crazy spinning against the couch in the living room.

I have my Samsung JetBot AI scheduled to run at 2am every day. I can get stuck on various items that the cats drag around and play with and it gets stuck in the wheels. I am surprised how much it collects. I still have to catch up on the tight areas where it can’t access, but I enjoy that it catches the major traffic areas well.

For hair you will want a brush assembly that will cut hair. I agree most, almost all, robot mops wont apply enough downward force. The xwow r2 is the only robot Ive ever worked with that has… but as I said the software isn’t great and the company essentially doesn’t exist. https://a.co/d/062TPPNo In lieu of those the mova p10 ultra will handle the hair to an acceptable level, grab the hair cutting brush instead of the stock brush. Mopping isn’t as good as the xwow r2… but I have not had one break… and the app is fairly reliable. I only have two of them so, not a huge sample size. https://a.co/d/01mUiskb I really like samsung jetbots as they are super cheap on ebay, and I haven’t had any of those fail either. They run twice a day every day and I have three jetbots and two jetbot ai+. Both of the ai+’s batteries failed. One of their gear trains failed as well. But the jetbots just keep chugging along. Reason I bring it up as, Ive picked up my xwow r2’s and my jetbots for about $200 a piece. The mova p10 ultra’s for, I believe $450 each… So, if it were me, and I absolutely had to have one and only one machine… then I would grab another p10 ultra. However if you have technical skill, Id recommend a pair, the xwow r2 and the samsung jetbot. Let the jetbot run every day, handle the bulk of the hair and such. Let the xwow r2 mop once or twice a week. I disable the vacuum functions on the xwow r2s as they dont have auto empty etc. and mopping robots dont stack up when compared to dedicated vacuum robots. But the mova p10 ultra’s are fairly nice because they dont cause nearly as much fuss compared to the xwow r2s and their vacuum functions aren’t terrible. I’ll say that the p10s avoid obstacles much better than most of the robots in my… uh… fleet. But I dont often have to play hide and seek with the jetbots, my p10s have a half dozen hiding places they like to hang out in… Id be curious if you could get better mopping performance by dropping a 10lb weight on top of your robot to get it to scrub the floors…