Sea To Summit - Comfort Light Insulated Women's Air Sleeping Pad

I have one - works very well in practice and pretty light. I have the compatible pillow that stays in place and is very light.

Ha, same. Started with the 'ol cheapo Klymit Static V, moved to the small mummy Therm-a-Rest XLite NeoAir for a couple years, then figured I'd get a wide to see if that helped with side sleep comfort so my butt and knees weren't off the edges (& went extra warm because may as well eliminate redundancies) with the Therm-a-Rest XTherm in reg wide. No dice. Tried a friend's Nemo Tensor, and wasn't for me. Tried the large women's Sea to Summit Comfort Light Insulated air - dimples felt odd and was too thin; no better than my old mummy xlite for overall comfort even with the wider shape. Running out of budget to throw in for the S2S Ether Light XT test and given my experience with the Comfort Light, wasn't convinced it was the move. Still haven't tried vertical baffles like the Expeds, and maybe that'd do fine, but instead just went all in on the reg wide chonky Neoloft... and good god. With that soft knit stretch top, slept a like the coziest dreamy log for 8.5 hours first time I took it out (and then 6 the next, but only thanks to a disruptive woodpecker. Nature!) I hesitate to mention/recommend it here as it kinda undermines the whole forum topic (ultralight) with its extremely-not-ultralight weight. But packs just as small as my reg-wide XTherm and as a bike camper, pack size matters more than strictly weight so I'm sticking with it.

Get a cot. Seriously, I have several types. The Roll a cot we used in hotel rooms when we needed an extra bed. It also allows adjustment for firmness For summer camping in very hot weather and,/or humidity I use a Thermostat ultralight cot. Which allows air to circulate around me with or without a sleeping bag or my coolmax liner. To this for varying degrees of comfort I can add my CCF Ridgerest pad, or my new sea to summit comfort light pad. These 3 things cot CCF pad Air mattress Mix and match will allow you to adjust not just for physical comfort but comfort for temperature as well. Just add appropriate sleeping bag for temperature. Needless to say I don't use the cot when the temperature drops.

When I did Baker I brought a closed cell pad (Nemo switch back) and an inflatable (Sea to summit) for comfort and redundancy. You'll be hard pressed to find a new bag that's also lightweight for $200. You'll probably need to see if you can find something used or I would recommend you see if you can rent one.

Big Agnes and sea to summit checks all your boxes. Small/compact, uses vertical baffles to prevent that bouncy castle feeling and provide actual support

I personally think Sea to Summit pads are comfortable.  Nemo Tensor might interest you as well. 

Most don't last very long if you're using them more than 30 nights a year in my experience. These manufacturers are banking on most buyers using them less than that. For super avid backpackers and thru-hikers, obviously we use them way more and therefore need to replace them more frequently. I've always bought them from REI and get them replaced under their policy within the year. Or if it's little seam weld pinholes, take advantage of the warranty (I use Sea 2 Summit pads mostly). But yeah I think the companies just absorb the loss from heavy users, who are a minority of total sales they make globally. Most people just buy a pad to go camping once or twice a year and it just sits in their closet for years before it gets the same amount of camp time as we'd put it through halfway into a thru-hike. Not sure if that made sense - still pre-caffeine today edit: getting holes from pokey things is a given despite the best careful babying if you're out enough, especially in the desert. but i'm not really talking about those kind of holes (that can be patched) - i mean the phantom leaks that can't be identified or fixed easily, like seam welds, valve stuff, etc. (especially on quilted/dimpled baffles) whenever i've returned a pad it's got several patches on it - i keep the solider well bandaged until he can't fight any more

All my sea to summit pads have developed stress pinholes in the dimple welds, nothing to do with anything I could have done or prevented as a user, it's a common defect with that style of baffle.

Good for you for taking care of all your gear. I also take good care of my gear and get many miles out of it. Your response sounds quite lecture-y and finger waggy tbh, making the assumption that others don't take good care of their gear. All my sea to summit pads have developed stress pinholes in the dimple welds, nothing to do with anything I could have done or prevented as a user, it's a common defect with that style of baffle. Manufacture defects on pads are quite common and have nothing to do with user care. No matter how much you baby your sleeping pad, if it has a weak valve attachment, it's gonna develop a leak.

I have one and will only use it on the warmest of nights.  I use a sea to summit most of the time because it's pretty light and has a much higher R value.  It's also very comfy.

Tra i menzionati possiedo il Sea to Summit e posso parlarne bene. A pari caratteristiche c'è il cinese Naturhike di cui ne parlano molto bene.

Don’t go self inflating if you want that much height. Car camping, yes, any of the massive, tough, heavy self inflating mats will be fine.   Go to a camping/bushwalking shop and try a Nemo tensor insulated (wide). Fill it up then let out juuuust a bit of air. You can put a closed cell foam mat underneath if you can’t get a balance between a comfortable shape and your hips touching the ground.  Sea to summit are also comfortable but don’t insulate as well.   Also - I know you know this - it’s easier if you can lose a bit of weight. I find it much less comfortable sleeping on the ground after gaining weight. 

Love my S to S pad also. Rivals my Select Comfort bed at home. Bought a back up in case they go out of business.