GL.iNet - Marble (GL-B3000) Wi-Fi 6 Home Router

I am rooting on the Gl.iNet routers atm. If you only need wifi 6, look at the Gl.one Beryl AX which offers 2.5gbps WAN and 1gbps lan. If your internet plan is only up to gigabit you can also go with a more stylish Gl.iNet Marble.

I have a Marble B-3000. It is designed for home use and I get 2-3 bars on 5ghz at 160mhz bandwidth. I get a minimum of 250mbps (In the farthest place, the basement. This is also a 3 story home.

I have three GL.iNet routers: a Beryl AX, Opal, and Marble. The user interface may be similar across them, but I haven't been able to get the Marble to pass through the login portal so that it can authenticate and use the free wifi available here. Both the Beryl AX and Opal connect to the same wifi network, then display a link to the login portal. After I authenticate, I can access the free wifi. It might be user error, but I think the Marble simply doesn't offer it because a home router doesn't need to connect to public wifi.

I bought a GL-iNet "Marble" model GL-B3000 because it had OpenWRT and AdGuard Home installed already. It only has three ports: WAN, Lan 1 and Lan 2, and wi-fi, so I use it in series with my home broadband connection device. Qualcomm dual core 1 GHz. DDR3L 512MB/NAND flash 128MB, 4 internal antennas Bought via AliExpress for $75 AUD, which is about 42 EURO

Hi, I hade similar problem, I used Mikrotik than Ubiquity Edge X, but half year ago I have found GLI.net It’s OpenWRT by default and it cost similar to TP-Link. It have WireGuard, Tailscale and AddGuard as native app ;)

Exactly. Don't waste money on these shitty consumer routers. The only decent ones are from gl.inet that come with openwrt. If you need more, look into opnsense on something like qotom or other minipc, mikrotik, ubiquity and separate access points.

Poor performance, very poor routing performance. And overpriced.