Deco X95 AX7800 Tri-Band Mesh WiFi 6 System

I’m running TPLink Deco x95… I grew tired of the app only interface (NO WEB BASED BROWSER FOR SETUP)… So they are now just wired backhaul access points to a TPLink archer AX6600. They are solid hardware wise… the deco software is a let down however. For reference I run home assistant with a heap of devices including cameras and a Plex server. I use HomeKit via a hard wired ATV4K and 6 HomePod minis through the house. Home assistant serves up alle devices and cameras to HomeKit without issue.

Yep, a Mikrotik would be on line since a long time... Last one I installed. I opened the quick set page, selected Home AP in roll down list. Filled all the fields, clicked OK, the router rebooted. And everything was configured at once DHCP, DNS, subnet, WIFI, basic Firewall rules, even DDNS is configured with a UID you can use with any other providers. 2 more pages to fill and 3 clicks and got VPN up and running. I configured a TP-Link AXE7800 lately and it was a lot more hard and there's 0 analytics nor any advanced functions, leaving me pretty deceived for a router of this price range. Basically a router with advanced analytics and control under 100$ doesn't exist. Oh wait.... Mikrotik has it all.

If your FTTP NTD is stuck in the garage, don’t expect one giant router to cover the whole property. Even a high-end unit like the ASUS GT-AX11000 Pro will choke once you add 20+ meters, two walls, a wardrobe, and three doors. Wi-Fi 6 is good, but it can’t bend physics. What actually works: Stay ASUS: Another GT-AX11000 Pro in AiMesh mode with 5 GHz-2 dedicated to backhaul. Identical hardware syncs better and avoids a lot of the “AiMesh nightmare” stories. TP-Link Deco X95/X90: Very solid tri-band Wi-Fi 6 kits. Great balance of throughput and reliability. Eero Pro 6E: Simple and stable, though be aware that features like advanced parental controls, ad blocking, and network security sit behind a paid Eero Plus subscription. Stock Eero hardware still covers fine, but the extras aren’t free. Ubiquiti UniFi: Fantastic when you can run wired backhaul. Pure wireless uplink works, but it takes more tuning and often won’t outperform a well-placed consumer tri-band mesh system. Placement > hardware. Don’t leave your main router in the garage. Pull a short Ethernet run inside (adhesive raceways look tidy) and put your main node on the first interior wall. Add a second node halfway to the far corner, and if it’s still weak, a third to finish the chain. On a 1 Gbps NBN plan, a good tri-band mesh should still give you ~400–700 Mbps at the far end. With one lonely router in the garage, you’ll likely see <100 Mbps and dropouts. (Side note: I run FixIT Computer & Tech, a small IT shop in Port Angeles, WA. I see this exact situation all the time—new house, NBN box in the garage, and Wi-Fi disappointment. The fix is almost never “buy the most expensive router,” it’s smart mesh placement and making the backhaul work for you.)

I installed a Deco 9 mesh through a big but single story house. Excellent kit. As others said you turn off the wifi of the supplied router, plug in 1 mesh device and then add others as needed. Gives one seamless SSID and another for guests if you want. Few parental controls.

I also have Deco Mesh (6)- pack came with 1 router and 2 extenders. Works well with Sonic Fiber, no complaints.

I use deco mesh wifi 6

I replaced an older Netgear Orbi system a few years ago with a TP-Link Deco to get WiFi 6 and outdoor APs. It worked great for a few years and then because extremely unreliable. We switched about 6 months ago to a Firewalla AP7 WiFi system powered by a Firewalla Gold SE. I absolutely love the performance and reliability but it was the robust security is what drove the decision. Ubiquity was the other option we considered. They’re very compelling but we already had the Firewalla Gold SE router.

I switched from eero to TP deco and I like it more. Assigning 2.4 for IoT stuff is a great improvement. At one stage I was literally walking 100 feet outside to make my phone get to 2.4 because the eero cannot manually switch between bands. Deco WiFi 6 is great so far as long as you’re willing to fiddle with a few settings.

Lots of IOT stuff only connects at 2.4, and it can be pain to try and run the connection app on, for example, your new vacuum cleaner, if your phone cannot switch to that 2.4 band. Unlike the eero, with TP deco, you can make a 2.4 band network called “wieezzzy’s Internet of things”. It’s also pretty easy to force something to connect at a particular band or to connect to a particular hub like if you want your TV to always connect to the living room hub or something.

I have a basement, first, second and third floors. ISP's router on the first floor (WiFi 7), and a TP-Link Deco on the third floor (WiFi 6) that's wired to the router on the first floor. Coverage is fine, 500+ mbit everywhere. I dislike the Deco's forced online login and management via a phone app only, and its lack of logging or other functions, so I recommend against it, but otherwise the performance is more than acceptable. And the ISP router is pretty damned good (Orange Funbox 10).

I had the opposite experience - the TP Link 802.11AX router has a weaker signal than the Spectrum 802.11AX router. In fact it performs similar to my decade old 802.11AC router. Barely reaches the master bedroom, where the Roku now gets a “Fair” connection instead of “good” or “excellent”, and my cellphone now drops connection sometimes