TP-Link - Deco XE70 Pro AXE4900

Idk why you got down voted but I spent about 160 bucks to get two TP-Link Deco XE70 Pro from Amazon to replace my Eero Pro 6e +extender. I also have increased speeds and range. From my research seems like best bang for the buck. That being said the 300 bucks package here is alright if you want to stay in the same ecosystem. Not a crazy deal, but if you need it, you need it.

Love my Deco XE 70 pro system. 4 nodes 3 floors with amazing coverage.

You can but you should future proof. I'd return it and get at least a wifi 6e router. I currently use the TP-Link Deco XE70 Pro AXE4900 also on the 500mbps plan. It was the cheapest tri-band 6e I could find and have been pleased with it

I just switched from Eero Pro 6 to a TP-Link Deco XE70 Pro. My interest speeds have increased and range of signal has increased as well.

For a quick, easy and uncomplicated setup TP-Link mesh systems are a good option. You didn't specify your internet speed, so I'll assume 1gbps max. If it's faster than that you'll want to get a mesh system that can match it. For example if you have 2gbps service you'll want a mesh system with 2.5gbps WAN and LAN ports. Let me know if you have faster internet speed and I could provide additional recommendations. I'm listing 3 unit sets since you'll have one mesh unit per floor, and all will be connected via ethernet (wired backhaul), per your post (you are running ethernet to each floor). WiFi 6 is still a great technology, offering 2.4ghz and 5ghz band support. WiFi 6E adds 6ghz band support. WiFi 7 is the newest technology, also has 6ghz band plus other upgrades. WiFi 7 is still new, can have bugs and you could encounter quirks. Not trying to scare you away from WiFi 7, but if you want something rock-solid I'd recommend WiFi 6 or WiFi 6E. I myself am using WiFi 6 and don't plan to upgrade to WiFi 7 for at least 2 years. All prices below are for units I found at amazon.com. TP-Link recommendations - Deco X55 ($130, AX3000, WiFi 6 dual band (2.4/5ghz), 3 pack, 3 gigabit ports per unit); Deco XE70 Pro ($240, AXE4900, WiFi 6E tri-band (2.4/5/6ghz), 3 pack, 2.5gigabit WAN & 2 gigabit ports per unit); Deco BE63 ($420, BE1000, WiFi 7 tri-band (2.4/5/6ghz), 3 pack, 4 2.5gigabit WAN/LAN ports per unit). A side note:, TP-Link charges extra for some security features; it's a subscription service, so you'll pay it as long as you want those features. [https://www.tp-link.com/us/support/faq/4319/](https://www.tp-link.com/us/support/faq/4319/) Most people might be interested in adding Security+ ($35.99/year). Families with children using the internet might also want to add Advanced Parental Controls ($17.99/year). So about $54 extra is paid every year, for these increased security features. But TP-Link is the easiest to setup and use, not complicated, so perhaps the ease of setup is worth it to you. Or if you don't want the additional security features (summarized at [https://www.tp-link.com/us/homeshield/](https://www.tp-link.com/us/homeshield/) ) then you don't need to pay for it. Eero and Netgear ("Orbi" product) sell some mesh systems as well. Both of those also require subscription sign-ups for additional security features. If you are curious about these I can post some thoughts on them. ASUS includes Ai Protection Pro (security scanning/protection via Trend Micro) with their products for free. ASUS products cost more for initial purchase, but if you keep a mesh system for 4 years, then you've saved $216 by not paying for the security features (assuming TP-Link's $54/yr fee). However ASUS products can sometimes be a bit problematic to setup and use. You would probably have no issues but just warning you. I use an ASUS mesh system and it works well for me (XT8). I won't recommend it to you though, as it's an older system. Below are some newer recommendations. ASUS recommendations: ET8 ($259 w/coupon, AXE6600, WiFi 6E tri-band (2/5/6ghz), 3 pack, 2.5gigabit WAN & 3 gigabit LAN ports per unit); BT6 ($591, BE9400, WiFi 7 tri-band (2/5/6ghz), 3 pack, 2.5gigabit WAN & 3 gigabit LAN ports per unit). Hope that helps with your decision. Good luck and advise us if you have any questions.

Based on your post I think the TP-Link Deco BE63 would be good for a WiFi 7 upgrade. It has 2.5gb WAN and 2.5gb LAN ports, This should work well with internet speeds up to 2.5gbps. If you have faster internet then this system will throttle (reduce/limit) your speed to 2.5gbps max and you should consider something with 10gb WAN and LAN ports (which would of course be more expensive). I don’t think most folks need internet speeds over 1gbps, but that’s just my opinion. The BE68 is substantially more expensive but I think it is a partial solution. It only has a single 10gb WAN port on each device, then 2.5gb LAN and gigabit LAN port. So even if you had 5gb fiber internet and hooked that up to the 10gb LAN port, you’d still be throttled to 2.5gb on the LAN. So I suggest the BE63 for your use case. The mesh BE63 3-pack kit is on sale at Amazon as I write this. Instead of $499.99 it’s $419.99 with a coupon (shown on the Amazon product listing page). I know you stated you’re looking for something affordable, but this is about the price you could expect to pay for tri-band WiFi 7 mesh technology. If you wanted to save a bit you could opt for WiFi 6E instead (still gives you 2.4/5/6ghz bands), but you won’t get multi link operation and some other WiFi 7 only featues. You can’t take advantage of MLO for example on WiFi 7 unless your client devices support it, so I think WiFi 6E is a good system to purchase today. Still a bit early to get WiFi 7, as the tech is still improving and prices will continue to fall. If you want to buy WiFi 7 today, you will pay more. Meanwhile prices for WiFi 6E and WiFi 6 routers/mesh systems are very reasonable in comparison. A good TP-Link 6E mesh system to consider would be the Deco XE70 Pro. 2.5gb WAN and two one-gigabit ports on every device. The 3 pack is $239.99 at Amazon now with the coupon, $30 off normal price. The Deco XE75 Pro looks very similar, a little bit faster theoretical speed on the 5ghz band (perhaps it is 3x3 streams instead of 2x2, that would make it ‘faster’). It’s $269.99. If I were picking between these two I would get the Deco XE70 Pro. I doubt you would notice the speed difference between that and the XE75 Pro. If you want to save even more money you can buy most of those products in “Used - Like New” condition, just check the product listing. If you decide to do this make sure it’s sold by Amazon! That way if you have any issues you could easily return it within 30 days. A word of warning on “Used- Like New.” Sometimes it is a customer return (they didn’t like it, couldn’t figure out how to use/configure it, etc.) and then that is a great deal for you, as you get a like new product for sometimes $100-$150+ less money than if it were brand new. Other times the person who bought it and returned it maybe discovered it was broken, or they tried to apply custom firmware to the router and bricked/broke it. Amazon has no way to really test these devices when they are returned.. I am confident all they do is look and say, “Yup, looks like the product I see on the box. Seal it back up and sell it as ‘Used-Like New.’” So it is a bit of a crap shoot. I will mention I bought my current ASUS XT8 mesh system (WiFi 6) four years ago as “Used, Like New” and saved nearly $200 from the brand-new price. But I had to factory reset the router & mesh node as the prior purchaser’s wireless configuration was still on the devices (clearly they tried it, then decided to return it without factory resetting it). Easy for me to fix, just another step, 5 minutes. If you want something that will “just work” and don’t want to mess with potential issues, then just buy a brand new unit. Another point about cost: $419 may seem like a lot, but consider how long you will own it and the cost isn’t too bad. For example your current mesh system is about 5 years old. If the new system costs you $419 and lasts 5 years, then it’s only about $7/month (over a 60 month period) that you are paying for that product. Not too bad, it’s less than a trip to Starbucks, and most people get coffee more than once a month. I don’t recommend “prioritizing network traffic” as this requires the router to inspect every data packet, which can slow down all devices using the network. As long as you have a well-functioning network and sufficient bandwidth/speed for your devices, you shouldn’t need to bother with Quality of Service (QoS), device prioritization, etc. If my thinking on this is inaccurate, someone will helpfully correct me. Good luck and enjoy your new hardware!

TP Link Deco 6E - had it for about 2 years and it's been good and super reliable. There were some concerns recently about TP Link routers phoning home to China, so something worth looking into I guess if you're worried. The management app (so take it for what it is, requires a phone app to manage) is decent, although a little annoying with the upsell of the safety suite. The feature set is great - guest network, IoT network, QoS, VPN server and client, 3 ports (only gigabit though) on each device, and 6Ghz wireless backhaul (or wired is also supported). At the time the Wifi 7 model just came out and was much more expensive so I didn't really see the point. If I were buying a new router today I'd probably go for a Wifi 7 model. Another upgrade in that is it looks like the Wifi 7 model has 1x10Gbps port and 2x2.5Gbps so that's some good future-proofing right there. Came from having Google Wifi, which I think was overall a little bit better, but I'm not upset about it. Obviously Ubiquiti is the gold standard if you wanna go that deep into it, but for a more casual (and much more affordable) solution I am not upset with my Deco. It's about $300 for 1 - have a 3-pack (~$700). If you don't need mesh, I've had good luck with Asus routers in the past and last I heard reviews for them are pretty good. Around $300 the TUF BE3600 looks like it might have all modern features you'd want.

Not sure if you mean you have coax and ethernet on each floor? If so this makes it fairly simple, a few steps to get this working. Mesh wifi would make sense, especially if each router can be centrally located and connected via ethernet. Personally I use the tp-link deco 6e mesh and I'm happy with it. It looks like you have some ethernet cables already connected to your main router, if those cables go to spots in your home that would be where you'd put your mesh wifi routers, then your done. From there you will need to disable the wifi on the ISP router, commonly called putting it in "bridge mode". Your order of connection would look somewhat like this. All connected via ethernet. ISP router - > Ethernet switch - > mesh wifi hardware If you'd like to utilize all those hanging blue ethernet cables you'd have to terminate them your looking for something called an ethernet crimper, lots on amazon. Hope that helps, let me know if you need any more clarification.

Get a tri band mesh router set.  Like deco wifi 6e or 7.  I had 6e were decent and then got a pair of d link be9300's used for $200.

I’m very happy with Tp link deco 6E

Ive had the Deco 4 and now Deco6e. I f'in love it! 3 pods and covers the house and property quite nicely.